Investigation of Thermohydrodynamic Processes in the Solar Air Heater Absorber of a Polygeneration Device Intended for Freshwater and Hot Water Production
DOI:
https://doi.org/10.24412/2181-4473-2025.3.201Keywords:
solar air heater, polygeneration system, heat transfer, pressure, density of the flow, absorber, boundary condition, energy loses.Abstract
In this article presents the mathematical modeling and numerical analysis of heat and mass transfer processes in solar air heater collectors with complex absorbers, with particular attention to the role of embedded tube air channels and cavity depth geometry. Solar energy–based desalination and hot water production technologies are highlighted as sustainable and environmentally friendly solutions to the global freshwater shortage. A theoretical framework was developed based on the laminar boundary layer differential equations, accounting for thermodynamic and hydrodynamic properties of compressible media, as well as pressure variations and frictional forces in heat transfer. The influence of geometric cavities on airflow structure was studied, demonstrating that indentation-induced vortices enhance turbulence near the wall, intensify temperature gradients, and significantly increase convective heat transfer. However, excessive cavity depth leads to additional turbulence and higher pressure losses, thereby reducing efficiency. Semi-empirical approaches derived from the hypotheses of Prandtl, Taylor, and Kolmogorov were applied to optimize boundary layer modeling, introducing the cavity coefficient (φ) as a governing parameter. Experimental and theoretical results confirm that properly optimized cavity geometries not only stabilize the airflow but also maximize thermohydraulic efficiency of solar collectors. Validation of the proposed mathematical model was carried out using COMSOL Multiphysics 6.0, with an average relative error of 4.6%, confirming the adequacy of the model. The findings provide a reliable foundation for the design and optimization of advanced solar air heater collectors integrated into polygeneration systems, contributing to sustainable water desalination, hot water supply, and improved energy efficiency under varying climatic conditions.
Downloads
References
Published
License
Copyright (c) 2025 Bekzod Abdukarimov (Author)

This work is licensed under a Creative Commons Attribution 4.0 International License.







