Local Seismic Load on the Runway Beam of a Top Running Overhead Crane
DOI:
https://doi.org/10.24412/2181-4473-2026.4.102Keywords:
Seismic Load, Overhead crane, Industrial building, Stiffness, Frequency, Vibration modeAbstract
Runway beams are the primary load-bearing structures for top-running overhead cranes and serve as structural elements of industrial building frames. Vibrations of the crane and the suspended load, caused by vertical seismic acceleration, generate inertial interaction between the crane and the runway beam. This is the main topic of the presented article. A calculation model is proposed for determining the local seismic load resulting from vertical seismic acceleration. The main result is the independence of the seismic load from changes in any parameter characterizing a particular system, and the impossibility of applying a unified approach to such problems without adjusting the calculation model to the specific task.
Downloads
References
1. Ordinance No71 by Government of Georgia. Technical regulation -Earthquake engineering Government of Georgia. Tbilisi, Georgia, 2014. pp. 6-12
2. SNiP II -7 81 Construction in seismic areas.Gosstroy of Russia.Moscow, Russia2013.pp. 3-5
3. International Code Council International Building Code Alabama, USA 2000pp. 291-330
4. James M. Fisher Design guide 7. Industrial building design. Third editionAISC. USA2019 pp. 53-59
5. Central Research Institute of Industrial Buildings. Guidelines for the design of single-storey and multistorey industrial buildings with a steel frame in seismic areas.Moscow, Russia1977.pp.9-28
6. Kuznetsov V.V. Designer's Handbook. Steel Structures. Vol.2 ACB. Moscow, Russia1998; pp. 86-105
7. Godoy A., Barbier F., Chatzigogos C., Besson N., Thibon A and Ray M. Comparative seismic analysis of overhead crane on steel frame carrying structure: evalution of adequate equipment-structure interaction modeling. Second European Conference on Earthquake Engineering and Seismology, Turkey, Istanbul Aug. 25-29, 2014
8. Birbraer A.N. Seismic analysis of structures, Nauka, St.Peterburg, Russia 1998 pp. 208-226
9. Radlov K. and Kotzev N. System ”girder crane-building” dynamic analysis in case of earthquake. RECENT, Industrial Engineering Journal 2010 Vol. 11 No.1 pp. 46-49
10. Birger I.A. and Panovko Y.G. Strength, Stability, Vibrations. Vol.3 Mechanic Engineering, Moscow, Russia 1968 pp. 270-281
11. GOST 25711-83 All-service electric overhead travelling cranes with lifting capacity from 5 to 50t Standarts, Moscow, Russia1983pp. 5-9
12. Esadze S., Abesadze M Local seismic load on the column of industrial building. Works of GTU 2024 No4 (534) pp. 167-172
Published
License
Copyright (c) 2026 Esadze, Tamar Esadze, Mikheil Abesadze (Author)

This work is licensed under a Creative Commons Attribution 4.0 International License.







