Analysis of turbines for micro-hydropower plants and using the turbulence model

Authors

  • Uktam Salomov Fergana Polytechnic Institute
  • Bekzod Abdukarimov Fergana Polytechnic Institute
  • Omadjon Urishev Fergana Polytechnic Institute

DOI:

https://doi.org/10.5281/zenodo.12570514

Keywords:

Micro HPP, water consumption, water pressure, Kaplan turbine, Comsol Multiphysics 6.1

Abstract

One of the biggest challenges in the world today is access to safe and affordable electricity. As a cost-effective source of renewable energy, the use of “Micro HPP” in the flow of rivers or canals is currently becoming popular in our country. In this article, the types of micro HPP turbines and their application are technically divided into types and studied based on the turbulence model using the example of the Kaplan turbine. The rotation speed of the Kaplan turbine at different water consumption is compared with the experimental results and the results obtained in the modeling. In addition, the Comsol Multiphysics 6.1 program was used to calculate the efficiency of the studied turbine at different water consumption and water flow rates.

Downloads

Download data is not yet available.
References

Downloads

Published

13-06-2024

How to Cite

[1]
U. Salomov, B. . Abdukarimov, and O. Urishev, “Analysis of turbines for micro-hydropower plants and using the turbulence model”, JCET, vol. 2, no. 1, pp. 14–21, Jun. 2024, doi: 10.5281/zenodo.12570514.

Share

Most read articles by the same author(s)

Similar Articles

21-26 of 26

You may also start an advanced similarity search for this article.