Analysis of the Relationship Between Water Consumption and Headin a Micro Hydropower System

Authors

  • Uktam Salomov Fergana State Technical University Fergana
  • Akmaljon Kuchkarov Fergana State Technical University Fergana
  • Omadjon Urishev Fergana State Technical University Fergana

DOI:

https://doi.org/10.24412/2181-4473-2025.3.204

Keywords:

Micro hydropower, head loss, pipe hydraulics, water consumption, penstock, CFD modeling, renewable energy

Abstract

This study analyzes the relationship between water consumption and head losses in a micro hydropower system, with a particular focus on penstock hydraulics. Using theoretical modeling combined with computational fluid dynamics (CFD), the research evaluates the effects of varying water flow rates on velocity distribution, pressure loss, and head efficiency. Results indicate that velocity magnitude increases proportionally with flow rate, with peak values reaching 9.4 m/s at 3 m³/s. Pressure distributions demonstrate that head losses are strongly dependent on flow rate and pipe geometry, confirming the quadratic relationship between velocity and frictional resistance. The findings emphasize the importance of optimal pipe diameter selection and accurate modeling of both friction and minor losses, especially under transitional and turbulent flow conditions. This study provides insights for the efficient design of micro hydropower systems, ensuring stable turbine operation, reduced hydraulic losses, and improved energy output.

Downloads

Download data is not yet available.
References

Downloads

Published

23-10-2025

Issue

Section

Articles

Categories

How to Cite

[1]
U. . Salomov, A. . Kuchkarov, and O. . Urishev, “Analysis of the Relationship Between Water Consumption and Headin a Micro Hydropower System”, JCET, vol. 3, no. 2, pp. 21–29, Oct. 2025, doi: 10.24412/2181-4473-2025.3.204.

Share

Most read articles by the same author(s)

Similar Articles

1-10 of 30

You may also start an advanced similarity search for this article.