Comparative Analysis of CFD Modeling Methane Combustion in a Jet Using Various Turbulence Models

Authors

DOI:

https://doi.org/10.67846/jcet.2026.42114

Keywords:

Turbulent diffusion combustion, methane-air combustion, k-ω turbulent model, EDM model, COMSOL Multiphysics, carbon monoxide, CFD modeling

Abstract

The article investigates the modeling of the turbulent diffusion combustion process of a methane–air jet using the COMSOL Multiphysics software package. This software is highly effective for simulating coupled phenomena involving the interaction of multiple physical processes, such as combustion. To model turbulent diffusion combustion, the interactions between turbulent flow, species mixing, chemical reactions, and heat transfer in fluids were taken into account. The k–ω, k–ε, and k–ω (SST) turbulence models were employed to simulate fluid flow, while the eddy dissipation model (EDM) was used to describe the combustion process. Methane combustion was represented by a two-step reaction mechanism involving the intermediate formation of carbon monoxide. The obtained temperature distribution results were compared with available experimental data.

Downloads

Download data is not yet available.
References

1. B. MAGNUSSEN, “On the structure of turbulence and a generalized eddy dissipation concept for chemical reaction in turbulent flow,” 1981, doi: 10.2514/6.1981-42. DOI: https://doi.org/10.2514/6.1981-42

2. J. Warnatz, U. Maas, and R. W. Dibble, Combustion: Physical and Chemical Fundamentals, Modeling and Simulation, Experiments, Pollutant Formation. Springer Berlin Heidelberg, 2006. [Online]. Available: https://books.google.co.uz/books?id=CAMFwje5WOQC

3. D. B. Spalding, “Mixing and chemical reaction in steady confined turbulent flames,” Symp. Combust., vol. 13, no. 1, pp. 649–657, 1971, doi: 10.1016/S0082-0784(71)80067-X. DOI: https://doi.org/10.1016/S0082-0784(71)80067-X

4. P. A. Libby and F. A. Williams, Turbulent Reacting Flows. in Combustion treatise. Academic Press, 1994. [Online]. Available: https://books.google.co.uz/books?id=JIdxQgAACAAJ

5. N. Peters, Turbulent Combustion. in Cambridge Monographs on Mechanics. Cambridge University Press, 2000. [Online]. Available: https://books.google.co.uz/books?id=Ednarkz6Y90C

6. T. Poinsot and D. Veynante, Theoretical and numerical combustion, vol. 144, no. 3. 2005. DOI: https://doi.org/10.1002/0470091355.ecm067

7. B. F. Magnussen and B. H. Hjertager, “On mathematical modeling of turbulent combustion with special emphasis on soot formation and combustion,” Symp. Combust., vol. 16, no. 1, pp. 719–729, 1977, doi: 10.1016/S0082-0784(77)80366-4. DOI: https://doi.org/10.1016/S0082-0784(77)80366-4

8. D. B. Spalding, Development of the Eddy-Break-Up Model of Turbulent Combustion. Pergamon Press, Ltd, 1976. doi: 10.1016/b978-0-08-030937-8.50024-6. DOI: https://doi.org/10.1016/B978-0-08-030937-8.50024-6

9. K. M. Saqr, M. M. Sies, and M. A. Wahid, “Numerical investigation of the turbulence–combustion interaction in non-premixed CH 4-air flames,” Int. J. Appl. Math. Mech., vol. 5, no. 8, pp. 69–79, 2009.

10. K. M. Saqr, H. I. Kassem, M. M. Sies, and M. A. Wahid, “Eddy-Dissipation Modeling of a Turbulent Diffusion Flame with a Reaction Rate Based on the Kolmogorov Time Scale,” IMAT 2010 –3rd Int. Meet. Adv. Thermofluids, Singapore, no. November, pp. 116–121, 2010, [Online]. Available: https://www.researchgate.net/publication/278677683

11. K. M. Saqr and M. A. Wahid, “Comparison of Four Eddy-Viscosity Turbulence Models in the Eddy Dissipation Modeling of Turbulent Diffusion Flames,” Int. J. Appl. Math Mech, vol. 7, no. 19, pp. 1–18, 2011.

12. R. Holder and C.-X. Lin, “Numerical Simulation of Reactive Turbulent Flows Over Bluff Body Flame Holders: A Parametric Study,” Aug. 10, 2008. doi: 10.1115/HT2008-56245. DOI: https://doi.org/10.1115/HT2008-56245

13. D. Achim, J. Naser, Y. S. Morsi, and S. Pascoe, “Numerical investigation of full scale coal combustion model of tangentially fired boiler with the effect of mill ducting,” Heat Mass Transf. und Stoffuebertragung, vol. 46, no. 1, pp. 1–13, 2009, doi: 10.1007/s00231-009-0539-0. DOI: https://doi.org/10.1007/s00231-009-0539-0

14. F. Lopez-Parra and A. Turan, “Computational study on the effects of non-periodic flow perturbations on the emissions of soot and NOx in a confined turbulent methane/air diffusion flame,” Combust. Sci. Technol., vol. 179, no. 7, pp. 1361–1384, 2007, doi: 10.1080/00102200601147898. DOI: https://doi.org/10.1080/00102200601147898

15. S. Khaydarov, “Application of a Modern Two-Fluid Turbulence Model for Methane-Air Simple Jet Combustion,” AIP Conf. Proc., vol. 3265, no. 1, 2025, doi: 10.1063/5.0265107. DOI: https://doi.org/10.1063/5.0265107

16. Z. Malikov, F. Nazarov, and S. Khaydarov, “Numerical Study of Subsonic Hot and Near-Sonic Submerged Jets Based on a Two-Fluid Model,” J. Appl. Comput. Mech., vol. 11, no. 4, pp. 871–886, 2025, doi: 10.22055/jacm.2024.46620.4559.

17. H. I. Kassem, K. M. Saqr, H. S. Aly, M. M. Sies, and M. A. Wahid, “Implementation of the eddy dissipation model of turbulent non-premixed combustion in OpenFOAM,” Int. Commun. Heat Mass Transf., vol. 38, no. 3, pp. 363–367, 2011, doi: 10.1016/j.icheatmasstransfer.2010.12.012. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2010.12.012

18. M. K. Büyükakın and S. Öztuna, “Study on nonpremixed methane/air combustion from flame structure and NOX emission aspect for different burner head structures,” Int. J. Energy Res., vol. 43, no. 10, pp. 5421–5437, 2019, doi: 10.1002/er.4641. DOI: https://doi.org/10.1002/er.4641

19. K. Zaker, M. H. Askari, A. Jazayeri, R. Ebrahimi, B. Zaker, and M. Ashjaee, “Open cycle CFD investigation of SI engine fueled with hydrogen/methane blends using detailed kinetic mechanism,” Int. J. Hydrogen Energy, vol. 40, no. 40, pp. 14006–14019, 2015, doi: 10.1016/j.ijhydene.2015.08.040. DOI: https://doi.org/10.1016/j.ijhydene.2015.08.040

20. F. Nazarov, R. Fayziev, S. Khaydarov, and J. Fardayev, “Numerical Calculation of Turbulent Flow in a Two-Dimensional Flat Diffuser Based on the Comsol Multiphysics Software,” ACM Int. Conf. Proceeding Ser., pp. 372–376, 2023, doi: 10.1145/3644713.3644764. DOI: https://doi.org/10.1145/3644713.3644764

21. S. J. Brookes and J. B. Moss, “Measurements of soot production and thermal radiation from confined turbulent jet diffusion flames of methane,” Combust. Flame, vol. 116, no. 1–2, pp. 49–61, 1999, doi: 10.1016/S0010-2180(98)00027-3. DOI: https://doi.org/10.1016/S0010-2180(98)00027-3

22. B. E. Launder and D. B. Spalding, “The numerical computation of turbulent flows,” Comput. Methods Appl. Mech. Eng., vol. 3, no. 2, pp. 269–289, 1974, doi: https://doi.org/10.1016/0045-7825(74)90029-2. DOI: https://doi.org/10.1016/0045-7825(74)90029-2

23. D. C. Wilcox, “Reassessment of the scale-determining equation for advanced turbulence models,” AIAA J., vol. 26, no. 11, pp. 1299–1310, 1988, doi: 10.2514/3.10041. DOI: https://doi.org/10.2514/3.10041

24. F. R. Menter, “Two-equation eddy-viscosity turbulence models for engineering applications,” AIAA J., vol. 32, no. 8, pp. 1598–1605, 1994, doi: 10.2514/3.12149. DOI: https://doi.org/10.2514/3.12149

Downloads

Published

16-09-2026

How to Cite

[1]
S. Khaydarov, “Comparative Analysis of CFD Modeling Methane Combustion in a Jet Using Various Turbulence Models”, JCET, vol. 4, no. 2, pp. 21–26, Sep. 2026, doi: 10.67846/jcet.2026.42114.

Share

Similar Articles

1-10 of 27

You may also start an advanced similarity search for this article.