Mathematical Analysis of Heat Flow Processes in Radiators

Authors

DOI:

https://doi.org/10.24412/2181-4473-2026.4.104

Keywords:

Heat transfer, Fourier’s law, Newton’s law of cooling, convection, Nusselt number

Abstract

The present study investigates the mathematical modeling and simulation of heat transfer processes in radiators, which constitute essential elements of modern heating systems. The research addresses both conductive and convective mechanisms of heat transfer, employing Fourier’s law to describe heat conduction and Newton’s law of cooling to characterize convective heat exchange. Various radiator types including cast-iron, steel, aluminum, and bimetallic are analyzed with respect to their thermal performance, structural characteristics, and operational efficiency. The influence of different connection schemes on fluid flow patterns, temperature distribution, and heat dissipation is examined through COMSOL Multiphysics simulations. The results demonstrate the significant effect of design parameters, such as pipe diameter, number of fins and inlet or outlet arrangements, on thermal performance and energy efficiency. Furthermore, the study discusses technical strategies to enhance heat transfer effectiveness, including hydraulic balancing, thermostatic regulation, and integration with low-temperature heating systems. The findings provide a scientific basis for optimizing radiator design, minimizing energy losses, and improving the overall efficiency of residential and industrial heating systems.

Downloads

Download data is not yet available.
References

1. Knudsen, M. D., Fiorentini, M., & Petersen, S. (2024). A heat-measurement-free strategy for economic model predictive control of hydronic radiators. Journal of Building Engineering, 97, 108885.

2. Molla, M. M., Hossain, A., & Islam, M. M. (2024). Cascaded lattice Boltzmann simulation of Newtonian and non-Newtonian mixture nanofluids with variable thermophysical properties in a cavity with vertical heat radiator. International Journal of Thermofluids, 24, 100865.

3. Shen, L., Sun, X., Wang, Y., Duan, W., Qin, C., Li, Q., & Zhou, L. (2024). Comparative experimental performance research on parameter optimization of foam metal radiators. Applied Thermal Engineering, 246, 121618.

4. Çağlar, A. (2023). Effects of using BN/water nanofluid on the thermal performance, energy saving, and power consumption of a panel radiator heating system. International Communications in Heat and Mass Transfer, 143, 106784.

5. Alescia, R., Fiorentini, M., Zanetti, E., & Scoccia, R. (2023). Energy flexibility quantification of the building’s thermal mass for radiator and floor heating systems. Energy and Buildings, 293, 113181.

6. Joshi, A., Khatawate, V., Sajjan, A. M., Banapurmath, N. R., Khan, T. M. Y., Ayachit, N. H., Shankara, R. P., & Badruddin, I. A. (2023). Experimental and numerical investigation of heat transfer characteristics of radiator using Graphene Amine-based nano coolant. Case Studies in Thermal Engineering, 46, 103074.

7. Jian, Y., Song, Z., Liu, S., Sun, R., & Yu, Z. (2023). Improvement of design model of radiator heating area in low-temperature heating: Application of machine learning techniques. Energy and Buildings, 291, 113043.

8. Giroux, M., Molesky, S., St-Gelais, R., & Krich, J. J. (2023). Radiator tailoring for enhanced performance in InAs-based Near-field thermophotovoltaics. Nano Energy, 113, 108607.

9. Rakoch, A. G., Lobach, A. A., Monakhova, E. P., Catenda, D. P., & Zheleznyi, M. V. (2023). The influence of dissolved oxygen concentration on the corrosion behavior of AK12M2 alloy in solutions simulating the operating conditions of heating radiators. Journal of Materials Research and Technology, 24, 10841–10850.

10. Ding, Y., Nord, N., & Timoudas, T. O. (2022). A study on data-driven hybrid heating load prediction methods in low-temperature district heating: An example for nursing homes in Nordic countries. Energy Reports, 8, 1234–1246.

11. Moghadam, T. T., Bruton, K., O’Sullivan, D. T. J., & Norton, B. (2025). Energy efficient achievement of indoor air quality and thermal comfort using mechanical ventilation heat recovery and solar-energy pre-heating. Energy Conversion and Management, 327, Article 119528.

12. Rahmati, A. R., & Gheibi, A. (2017). Experimental and numerical analysis of a modified hot water radiator with improved performance. Applied Thermal Engineering, 121, 632–643.

13. Lomas, K. J., Oliveira, S., Warren, P., Haines, V. J., Chatterton, T., Beizaee, A., Prestwood, E., & Gething, B. (2017). Do domestic heating controls save energy? A review of the evidence.Renewable and Sustainable Energy Reviews, 93, 52–75.

14. Ibastea, D., García, A., Álvarez, M., Garzón, B., Díez, F., Coca, P., Del Pero, C., & Molleda, J. (2018). Monitoring and control of energy consumption in buildings using Web of Things: A novel approach for smart retrofit. Automation in Construction, 87, 196–214.

15. Sun, C., Liu, Y., Cao, S., Gao, X., Xia, G., Qi, C., & Wu, X. (2020). Integrated control strategy of district heating systems based on load forecasting and indoor temperature measurement. Energy, 197, 117161.

16. CNR 2.04.05-22 – “Heating, Ventilation and Air Conditioning (HVAC)”

Downloads

Published

24-02-2026

How to Cite

[1]
E. Madaliev and F. Tillaboyeva, “Mathematical Analysis of Heat Flow Processes in Radiators”, JCET, vol. 4, no. 1, pp. 18–28, Feb. 2026, doi: 10.24412/2181-4473-2026.4.104.

Share

Similar Articles

11-17 of 17

You may also start an advanced similarity search for this article.