Simulation of Flow Around a Square Cylinder Using the DES Method With an Adaptive Mesh

Authors

  • Murodil Madaliev Fergana Sytate Technical University

DOI:

https://doi.org/10.24412/2181-4473-2026.4.101

Keywords:

Navier–Stokes equations, SST, DES, ANSYS

Abstract

A 3D numerical simulation of subcritical flow past a square cylinder (U∞ = 17 m/s, d = 0.042 m) was performed using Detached/Delayed Detached Eddy Simulation (DES/DDES) based on the k − w SST model. To improve resolution in the shear layers and wake core, anisotropic Hessian-based mesh adaptation was applied, preserving the wall layers (BL) and restricting the wake-box region. The isos of the Q criterion surface, the vortex core region structure, the velocity field, the turbulent kinetic energy, and the turbulence intensity are shown. The adaptive mesh selectively refines along strong gradient lines, providing a detailed picture of three-dimensional vortex dynamics and stable spectral characteristics with a moderate increase in the number of cells. The features of adaptive DES, time/step requirements, and practical tuning recommendations are discussed.

Downloads

Download data is not yet available.
References

Downloads

Published

17-01-2026

How to Cite

[1]
M. Madaliev, “Simulation of Flow Around a Square Cylinder Using the DES Method With an Adaptive Mesh”, JCET, vol. 4, no. 1, pp. 1–6, Jan. 2026, doi: 10.24412/2181-4473-2026.4.101.

Share

Most read articles by the same author(s)

Similar Articles

11-15 of 15

You may also start an advanced similarity search for this article.