Formation of Multiphase Turbulent Flow in Rotating Parts of High-Pressure Pipes Used for Water Supply to Agricultural Fields
DOI:
https://doi.org/10.24412/2181-4473-2026.4/105Keywords:
Turbulent flow,, diffusion,, laminar flow,, large aggregates,, Reynolds stress,, Navier-Stokes equations,, high-speed deformation.Abstract
This article explains the reasons for the occurrence of multi-phase turbulent flow in a curved pipe, and also investigates the phenomenon of cavitation of the generated turbulent flow in formation of multiphase turbulent flow in rotating parts of high-pressure pipes used for water supply to agricultural fieldse and the factors that cause vibration as a result. The classification of existing approaches to the numerical calculation of turbulent flows is based on the level of detail in the resolution of turbulent fluctuations and their energy spectrum. Given this feature, there are three main approaches (DNS, LES and RANS).In this article, the processes occurring in a bent pipe are studied using the RANS approach from the above approaches. As a result of turbulent flow, a vortex is formed in the pipe, and the effect of these vortices on the pipe has been studied. To study and numerically analyze this problem, we used the Reynolds-averaged system of Navier-Stokes equations, which takes into account the relationships between the phases. The system of Reynolds-averaged Navier-Stokes equations is not closed, and the unified Boussinesq hypothesis is used to close this system. Due to this, unknown terms of the Reynolds equation are formed, which are called Reynolds stresses.
Downloads
References
Published
Issue
Section
Categories
License
Copyright (c) 2026 Oybek Muminov, Shukhrat Utbosarov, Mardon Shoev (Author)

This work is licensed under a Creative Commons Attribution 4.0 International License.







