Numerical Simulation of Aerodynamic Flow Around a Building Using OpenFOAM Software

Authors

  • Nilufar Kurbonova Fergana State Technical University Fergana

DOI:

https://doi.org/10.24412/2181-4473-2025.3.202

Keywords:

Navier-Stokes equations, SST model, OpenFOAM, RANS, SIMPLE

Abstract

This article examines one of the pressing issues of modern urban development – the impact of high-speed air flows on buildings and surrounding infrastructure. The impact of wind loads plays an important role in the design of high-rise buildings, bridges and other construction projects, as it directly affects their stability, comfort and safety. To solve this problem, OpenFOAM software, an open platform for numerical modeling of continuum mechanics problems, was used. In this work, the finite volume method was used to discretize the transport equations and calculate the RANS (Reynolds-Averaged Navier-Stokes) equations. To ensure the accuracy of the calculations, the SIMPLE algorithm was used, which allows you to relate the velocities and pressures at each step of the iterative process. In addition, the SST (Shear Stress Transport) turbulence model was used to model turbulence in flows. This model has proven itself in calculating problems related to aerodynamics, as it combines the advantages of the k-ω and k-ε models, which allows to effectively describe both laminar and turbulent flow regions. The study simulated the flow around a building of various shapes and heights, which made it possible to identify key features of the distribution of speeds, pressures and turbulent characteristics in the vicinity of the building. The calculation results make it possible to assess the potential risks of structural failure, identify critical areas and optimize architectural solutions to reduce the negative impact of wind loads. Thus, the use of OpenFOAM and modern turbulence models, such as SST, provides a powerful tool for analyzing and predicting the aerodynamic characteristics of building objects, which is an important step in the development of sustainable urban development technologies.

Downloads

Download data is not yet available.
References

Downloads

Published

02-10-2025

How to Cite

[1]
N. Kurbonova, “Numerical Simulation of Aerodynamic Flow Around a Building Using OpenFOAM Software”, JCET, vol. 3, no. 2, pp. 8–14, Oct. 2025, doi: 10.24412/2181-4473-2025.3.202.

Share

Most read articles by the same author(s)

Similar Articles

21-24 of 24

You may also start an advanced similarity search for this article.