Mathematical Model for the Dynamic Equation of a Truck's Motion

Authors

  • Javohir Umrzoqov Tashkent State Technical University, Tashkent, Uzbekistan
  • Toxir Pulatov Turin Polytechnic University in Tashkent, Tashkent, Uzbekistan

DOI:

https://doi.org/10.5281/zenodo.14581565

Keywords:

Mathematical model, Newton's second law, Lagrange's equation, trajectory, mass, kinetic energy, dynamic model, angle, speed, braking

Abstract

This paper addresses the problem of formulating the dynamic equations of motion for a truck and developing its mathematical models. The motion of the truck is mathematically represented based on Newton's second law and Lagrange's equations. The dynamic characteristics of the truck, including its speed, force, and mass dependence, are analyzed using Newton's second law, while Lagrange's equations are applied to calculate the system's kinetic and potential energies. Using these methods, differential equations are formulated for the truck's motion, and its motion trajectories are analyzed. The study focuses on the dynamics of a truck moving on an inclined plane, calculating the motion trajectories at different speeds and angles. These calculations reveal the relationships between the truck's maximum speed, energy consumption, and motion trajectories. Furthermore, the energy accumulation process for trucks of various masses is examined, providing insights into how energy is consumed and accumulated during motion. Based on the results, potential ways to optimize the truck's motion and reduce energy consumption are discussed. The scientific significance of this study lies in its potential to create opportunities for efficient and energy-saving motion, particularly in the fields of transportation and mechanical systems. This mathematical model is also useful for improving energy processes in transportation systems and developing practical solutions to enhance the operational efficiency of trucks.

Downloads

Download data is not yet available.
References

Automotive Stability Enhancement Systems, (2004). http://dx.doi.org/10.4271/j2564_200406

De Wit, C. C., & Tsiotras, P. (1999). Dynamic tire friction models for vehicle traction control. In: Proceedings of the 38th IEEE conference on decision and control (Cat. No.99CH36304), IEEE, http://dx.doi.org/10.1109/cdc.1999.827937

Wang, Y., Yu, S., Yuan, J., & Chen, H. (2018). Fault-tolerant control of electric ground vehicles using a triple-step nonlinear approach. IEEE/ASME Transactions on Mechatronics, 23(4), 1775–1786. http://dx.doi.org/10.1109/tmech.2018.2837128

Bakker, E., Nyborg, L., & Pacejka, H. B. (1987). Tyre modelling for use in vehicle dynamics studies. In SAE technical paper series. SAE International, http://dx.doi.org/10.4271/870421

Bakker, E., Nyborg, L., & Pacejka, H. B. (1987). Tyre modelling for use in vehicle dynamics studies. In SAE technical paper series. SAE International, http://dx.doi.org/10.4271/870421

Pacejka Н.В., Besselink I.J. Magic foramla tyre model with transient properties// Vehicle System Dynamics. - 27. - 1997.

Russo M., Russo R., Volpe A. Car parameters identification by handling manoeuvres// Vehicle System Dynamics. — 34. — 2000. — C. 423-436

Litvinov A. S. Control and Stability of Automobiles. Publishing House "Machine Engineering." — Moscow, 1971.

Shimanovsky A. O., Lagodin A. V. Mathematical modeling of the liquid flow process in a boiler of a partially filled tank // Materials of the International Scientific and Technical Conference "The Contribution of University Science to the Development of Priority Areas in Industrial and Economic Activities, the Development of Economical and Environmentally Friendly Technologies, and Progressive Teaching Methods," dedicated to the 80th anniversary of the Belarusian State Polytechnic Academy. — Minsk, 2000. — p. 86

Mutoh, N., Hayano, Y., Yahagi, H., & Takita, K. (2007). Electric braking control methods for electric vehicles with independently driven front and rear wheels. IEEE Transactions on Industrial Electronics, 54(2), 1168–1176. http://dx.doi.org/10.1109/TIE.2007.892731

Hwang, S.-H., Kim, H., Kim, D., & Jung, K. (2010). Analysis of a regenerative braking system for a hybrid electric vehicle using electro-mechanical brakes. In S. Soylu (Ed.), Urban transport and hybrid vehicles. Rijeka: IntechOpen, http://dx.doi.org/10.5772/10183

Operative control system for automatic transmission-based hybrid electric vehicle using electronic wedge brake. In 2013 world electric vehicle symposium and exhibition (EVS27) (pp. 1–5). http://dx.doi.org/10.1109/EVS.2013.6914740

Ko, J., Ko, S., Son, H., Yoo, B., Cheon, J., & Kim, H. (2015). Development of brake system and regenerative braking cooperative control algorithm for automatic-transmission-based hybrid electric vehicles. IEEE Transactions on Vehicular Technology, 64(2), 431–440. http://dx.doi.org/10.1109/TVT.2014.23250566

Xu, W., Chen, H., Zhao, H., & Ren, B. (2019). Torque optimization control for electric vehicles with four in-wheel motors equipped with regenerative braking system. Mechatronics, 57, 95–108. http://dx.doi.org/10.1016/j.mechatronics.2018.11.006

Downloads

Published

25-12-2024

How to Cite

[1]
J. . Umrzoqov and T. Pulatov, “Mathematical Model for the Dynamic Equation of a Truck’s Motion”, JCET, vol. 2, no. 2, pp. 40–45, Dec. 2024, doi: 10.5281/zenodo.14581565.

Share

Similar Articles

1-10 of 35

You may also start an advanced similarity search for this article.