Thermal Performance Comparison of Pcm Based Latent Heat Storage Systems
DOI:
https://doi.org/10.5281/zenodo.13902763Keywords:
Latent Heat Energy Storage Systems (LHESS), Phase Change Materials (PCMs), Paraffin Waxes, Thermal Energy StorageAbstract
The efficient storage and utilization of thermal energy are crucial for advancing sustainable energy systems. Latent Heat Energy Storage Systems (LHESS) leverage the high energy density associated with phase transitions of Phase Change Materials (PCMs), providing an effective solution for thermal energy management. This study focuses on the thermal performance analysis of two different LHESS configurations. Paraffin waxes were selected as a PCM due to their advantageous thermal characteristics, such as high latent heat of fusion, chemical stability, and non-corrosive nature. The research methodology encompasses Computational fluid dynamics LHESS (CFD). Detailed charging and discharging simulations during 30 hours are conducted to predict the thermal performance, efficiency, and operational characteristics of each design under various conditions. The investigation also encompasses a detailed examination of their melting and freezing behavior, thermal conductivity, specific heat and density. Results indicate that at the 30-hour mark, nearly all of the Phase Change Material (PCM) in LHESS 2 has transitioned to the liquid phase when the charging simulation is conducted, whereas approximately 20 percent of the PCM in LHESS 1 remains in the solid phase. During the discharging phase, LHESS 2 demonstrates a faster and more efficient phase transition process. This data suggests that LHESS 2 exhibits a more effective performance compared to LHESS 1. The results are expected to offer valuable insights for optimizing LHESS designs, enhancing their efficiency and sustainability, and guiding the selection of appropriate systems for various industrial and residential applications.
Downloads
References
L. F. Cabeza, Ed., Advances in thermal energy storage systems: methods and applications, Second edition. Duxford, United Kingdom: Woodhead Publishing, 2021.
I. Dincer, A. Hepbasli, A. Midilli, and T. H. Karakoc, Eds., Global Warming: Engineering Solutions. in Green Energy and Technology. Boston, MA: Springer US, 2010. doi: 10.1007/978-1-4419-1017-2.
N. Juraboev, “A Comparative Study on Thermal Analysis of Latent Heat Energy Storage Systems Using Phase Change Materials,” presented at the ICTEA: International Conference on Thermal Engineering, 2024.
M. Kenisarin and K. Mahkamov, “Solar energy storage using phase change materials☆,” Renew. Sustain. Energy Rev., vol. 11, no. 9, pp. 1913–1965, Dec. 2007, doi: 10.1016/j.rser.2006.05.005.
A. Sharma, V. V. Tyagi, C. R. Chen, and D. Buddhi, “Review on thermal energy storage with phase change materials and applications,” Renew. Sustain. Energy Rev., vol. 13, no. 2, pp. 318–345, Feb. 2009, doi: 10.1016/j.rser.2007.10.005.
B. Zalba, J. M. Marı́n, L. F. Cabeza, and H. Mehling, “Review on thermal energy storage with phase change: materials, heat transfer analysis and applications,” Appl. Therm. Eng., vol. 23, no. 3, pp. 251–283, Feb. 2003, doi: 10.1016/S1359-4311(02)00192-8.
M. M. Farid, A. M. Khudhair, S. A. K. Razack, and S. Al-Hallaj, “A review on phase change energy storage: materials and applications,” Energy Convers. Manag., vol. 45, no. 9–10, pp. 1597–1615, Jun. 2004, doi: 10.1016/j.enconman.2003.09.015.
H. Mehling and L. F. Cabeza, Heat and cold storage with PCM: An up to date introduction into basics and applications. in Heat and Mass Transfer. Berlin, Heidelberg: Springer Berlin Heidelberg, 2008. doi: 10.1007/978-3-540-68557-9.
Solar Heat Storage: Volume I: Latent Heat Material. CRC Press, 2018. doi: 10.1201/9781351076753.
X. Xiao, P. Zhang, and M. Li, “Preparation and thermal characterization of paraffin/metal foam composite phase change material,” Appl. Energy, vol. 112, pp. 1357–1366, Dec. 2013, doi: 10.1016/j.apenergy.2013.04.050.
S. Mondal, “Phase change materials for smart textiles – An overview,” Appl. Therm. Eng., vol. 28, no. 11–12, pp. 1536–1550, Aug. 2008, doi: 10.1016/j.applthermaleng.2007.08.009.
B. Yang, J. Liu, Y. Song, N. Wang, and H. Li, “Experimental study on the influence of preparation parameters on strengthening stability of phase change materials (PCMs),” Renew. Energy, vol. 146, pp. 1867–1878, Feb. 2020, doi: 10.1016/j.renene.2019.08.052.
A. F. Regin, S. C. Solanki, and J. S. Saini, “Heat transfer characteristics of thermal energy storage system using PCM capsules: A review,” Renew. Sustain. Energy Rev., vol. 12, no. 9, pp. 2438–2458, Dec. 2008, doi: 10.1016/j.rser.2007.06.009.
X. Py, R. Olives, and S. Mauran, “Paraffin/porous-graphite-matrix composite as a high and constant power thermal storage material,” Int. J. Heat Mass Transf., vol. 44, no. 14, pp. 2727–2737, Jul. 2001, doi: 10.1016/S0017-9310(00)00309-4.
D. O. Akamo et al., “Enhanced thermal reliability and performance of calcium chloride hexahydrate phase change material using cellulose nanofibril and graphene nanoplatelet,” J. Energy Storage, vol. 75, p. 109560, Jan. 2024, doi: 10.1016/j.est.2023.109560.
F. Agyenim, P. Eames, and M. Smyth, “A comparison of heat transfer enhancement in a medium temperature thermal energy storage heat exchanger using fins,” Sol. Energy, vol. 83, no. 9, pp. 1509–1520, Sep. 2009, doi: 10.1016/j.solener.2009.04.007.
L. Fan and J. M. Khodadadi, “Thermal conductivity enhancement of phase change materials for thermal energy storage: A review,” Renew. Sustain. Energy Rev., vol. 15, no. 1, pp. 24–46, Jan. 2011, doi: 10.1016/j.rser.2010.08.007.
A. Abhat, “Low temperature latent heat thermal energy storage: Heat storage materials,” Sol. Energy, vol. 30, no. 4, pp. 313–332, 1983, doi: 10.1016/0038-092X(83)90186-X.
A. Palacios, M. E. Navarro-Rivero, B. Zou, Z. Jiang, M. T. Harrison, and Y. Ding, “A perspective on Phase Change Material encapsulation: Guidance for encapsulation design methodology from low to high-temperature thermal energy storage applications,” J. Energy Storage, vol. 72, p. 108597, Nov. 2023, doi: 10.1016/j.est.2023.108597.
Y. Li et al., “Stable salt hydrate-based thermal energy storage materials,” Compos. Part B Eng., vol. 233, p. 109621, Mar. 2022, doi: 10.1016/j.compositesb.2022.109621.
Physical-technical institute, Academy of Sciences of Uzbekistan, J. Akhatov, K. Akhmadov, N. Juraboyev, and Physical-technical institute, Academy of Sciences of Uzbekistan, “Thermal performance enhancement in the receiver part of solar parabolic trough collectors,” UNEC J. Eng. Appl. Sci., vol. 3, no. 2, pp. 5–13, Dec. 2023, doi: 10.61640/ujeas.2023.1201.
I. Jmal and M. Baccar, “Numerical study of PCM solidification in a finned tube thermal storage including natural convection,” Appl. Therm. Eng., vol. 84, pp. 320–330, Jun. 2015, doi: 10.1016/j.applthermaleng.2015.03.065.
R. E. Murray and D. Groulx, “Experimental study of the phase change and energy characteristics inside a cylindrical latent heat energy storage system: Part 1 consecutive charging and discharging,” Renew. Energy, vol. 62, pp. 571–581, Feb. 2014, doi: 10.1016/j.renene.2013.08.007.
Published
License
Copyright (c) 2024 Nodirbek Juraboev, Bekzod Abdukarimov, Mengdi Yuan (Author)

This work is licensed under a Creative Commons Attribution 4.0 International License.







